This is the complete list of members for Wicked_Stepper, including all inherited members.
| apply_mask(uint8_t *shift_register_value, uint8_t mask, uint8_t operation) | WickedMotorShield | protected |
| direction | Wicked_Stepper | private |
| filter_mask(uint8_t shift_register_value, uint8_t mask) | WickedMotorShield | protected |
| first_shift_register | WickedMotorShield | privatestatic |
| get_motor_brakeM(uint8_t motor_number) | WickedMotorShield | protected |
| get_motor_directionM(uint8_t motor_number) | WickedMotorShield | protected |
| get_rc_input_pin(uint8_t rc_input_number) | WickedMotorShield | privatestatic |
| get_shift_register_value(uint8_t motor_number) | WickedMotorShield | protected |
| getRCIN(uint8_t rc_input_number, uint32_t timeout=0) | WickedMotorShield | static |
| last_step_time | Wicked_Stepper | private |
| load_shift_register(void) | WickedMotorShield | protected |
| m1 | Wicked_Stepper | private |
| M1_PWM_PIN | WickedMotorShield | protectedstatic |
| m2 | Wicked_Stepper | private |
| M6_PWM_PIN | WickedMotorShield | protectedstatic |
| number_of_steps | Wicked_Stepper | private |
| old_dir | WickedMotorShield | protectedstatic |
| RCIN1_PIN | WickedMotorShield | privatestatic |
| RCIN2_PIN | WickedMotorShield | privatestatic |
| second_shift_register | WickedMotorShield | privatestatic |
| SERIAL_DATA_PIN | WickedMotorShield | privatestatic |
| set_shift_register_value(uint8_t motor_number, uint8_t value) | WickedMotorShield | protected |
| setBrakeData(uint8_t motor_number, uint8_t brake_type) | WickedMotorShield | protected |
| setDirectionData(uint8_t motor_number, uint8_t direction) | WickedMotorShield | protected |
| setSpeed(uint32_t speed) | Wicked_Stepper | |
| setSpeedM(uint8_t motor_number, uint8_t pwm_val) | WickedMotorShield | protected |
| speed | Wicked_Stepper | private |
| step(int16_t number_of_steps) | Wicked_Stepper | |
| step_delay | Wicked_Stepper | private |
| step_number | Wicked_Stepper | private |
| stepMotor(int this_step) | Wicked_Stepper | private |
| version(void) | WickedMotorShield | static |
| Wicked_Stepper(uint16_t number_of_steps, uint8_t m1, uint8_t m2, uint8_t use_alternate_pins=0) | Wicked_Stepper | |
| WickedMotorShield(uint8_t use_alternate_pins=0) | WickedMotorShield | |
